Flexi Elastomer Polyurethane WE coat is a single component. It is an Ultimate waterproofing & Solar Heat Insulation product. It gives a tough elastomeric waterproof membrane when reacts with atmospheric moisture



300% to 400% Elongation

of Flexi PU WE coat

Waterproofing for

Internal and external application

Very low thermal conductivity

combined with UV & IR resistance

On top of PU WE Coat, any

colour can be painted of your choice

Easily repairable if damaged



Bridges cracks on any Surface &

stops water seepages and leakages

Protection against Corrosion

How To Apply

Process 1

Ensure the surface completely clean and dry. Make it dust, oil and grease free.

Process 2

First apply WeatherTuff’s ‘Tuff Coat’ as a primer coating to seal the porosity of surface. Let it dry for 6 to 7 hours.

Process 3

Apply 1st coat of Flexi PU WE coat diluted with nitration free solvent like thinner. Let it dry for minimum 24 hours.

Process 4

Apply 2nd coat of Flexi WE coat in the same proportion as above.

Process 5

Leave the finished coat to dry for 12 to 24 hours. In a very hot ambient, it might take a little longer to dry completely.

NOTE :- Do not apply while raining or wet or damp surface, as the product cures immediately in such conditions & application might fail.


Solar Heat Insulation product
It covers upto 9 to 10 Sq Ft

when per Kg of PU WE coat

Available In


Available Size Of Products -

1 Kg, 5 Kg, 26 Kg, 50 Kg.